Mobile Action i-gotU Q-70 User Manual

Q-70
Device Overview
Wristband
How to wear your Q-70?
1
Wear Q-70 on your wrist
Put on the watch with the watch face facing up and the band
wrapped around your wrist. Align the clasp along the band to
find the holes where best fit the clasps.
3
Charge your Q-70
To charge your Q-70, place it in the charging box at
the other end of the USB cable. Close the box afterwards,
and make sure the Q-70 is securely covered. Plug the
USB connector to either a PC or power adapter to start
charging.
Q-Watch M
Button
Clasp
Core
Metallic contact for charging
2
Fasten Q-70 with clasp
Squeeze both clasps into the holes on the watch band until you
hear a click, indicating the band is securely fastened.
4
Change the watch band
1
1. Spread open both bands with the watch face facing up, and stretch
open the two straps that hold around the watch crown for the
watch to come off.
2. From below the band, insert the watch with face facing up into the
stretchable center area of the band and make sure the watch crown
is fixed in between the two straps to help secure the watch. Button
up the clasp on the side of the band with 2 holes.
User Manual
2
EN