Connecting An External Monitor - Fujitsu CELSIUS H780 Operating Manual

Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port (notebook and optional port
replicator), a digital monitor to the display port or the DVI-D monitor port on the optional port replicator
(optional port replicator only). The screen output is limited to a maximum of two screens at the same
time (see "Function keys and key combinations", Page
Monitorport Monitorport VGAconnection socket Monitor
Analogue VGA monitor port (on notebook or on
optional port replicator)
Digital DVI-D monitor port (on the optional Port
Replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
If you wish to operate the monitor via a DVI port, use the optional Port
Replicator available for your notebook.
Fujitsu
25, section "Changing the screen output").
Digital HDMI port (on the notebook)
Digital display port (on the optional port
replicator)
"Function keys and key combinations", Page
Connecting external devices
25.
57