Advertisement
UPSIDE DOWN IMAGE CAPTURE
If you need to mount your camera upside down to get the perfect photo or video angle, you can program the
camera to save the photo or video upside down so that it appears right side up when you review it on your
computer or TV. This eliminates the need to "flip" the photo or video later on your computer.
Symbol on LCD Screen
UP (default setting)
saves photos and videos in a normal "right side up" orientation
saves photos and videos upside down so that they appear right side up
when you review on your computer or TV. The video camera and photo
UPd
icons will blink quickly on the LCD screen to reminding you that you are
saving photos and videos in upside down mode.
Press the SHUTTER button to toggle between the UP / UPd choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
SETTING VIDEO LIVE FEED ON / OFF
You can set your camera to send a live video signal out the side TV or HDTV ports by toggling the VIDEO
LIVE FEED setting on and off. Video Live Feed 'ON' (LFO) allows for plugging the camera into wireless
transmitters and TVs for live viewing from the camera. Video Live Feed 'OFF' (LFF) allows for playback of
photo and video files from the camera onto a TV. Video Live Feed via the USB port is not supported.
If Video Live Feed is turned on (LFO), the camera will stay in normal camera mode when plugged into a TV
and will send a live video signal to the TV. Plugging in the component cable will send an HD video signal out
from the camera, and plugging in the composite cable will send a standard definition signal out from the
camera. NOTE: If the component cable is used to send live HD video out from the camera, and you begin
simultaneously recording HD video to the SD card, the live video feed will be reduced to standard definition
as the camera cannot record and transmit HD video at the same time. If you wish to have an HD live video
feed from the camera you cannot begin recording HD video to the SD card. If the composite cable is used
to send standard definition video out from the camera, then the camera can simultaneously record HD video
to the SD card.
Symbol on LCD Screen
LFF (default setting)
LFO
Press the SHUTTER button to toggle between the LFF / LFO choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING ON SCREEN DISPLAY ON / OFF
When the camera sends a live feed video signal out to a wireless transmitter or TV, it will send a battery
meter icon and a recording on/off icon via an "On Screen Display" that will appear in the video feed. If you
prefer to turn these status icons off, you can do so by toggling the "On Screen Display" setting off.
Symbol on LCD Screen
oSO (default setting)
oSF
Press the SHUTTER button to toggle between the oSO / oSF choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING PHOTO EVERY 2, 5, 10, 30, 60 SECONDS TIMING
You can shoot a photo every 2, 5, 10, 30, or 60 seconds, ongoing, with the "Photo every X seconds" mode.
When you see P2 (photo every 2 seconds is the default setting), you can press the SHUTTER button to
toggle the following options:
Symbol on LCD Screen
P2 / P5 / P10 / P30 / P60
shoots photos in 2 / 5 / 10 / 30 / or 60 second intervals
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING LED BLINKING ON / OFF
You can set the red LED light to blink while filming or to be off at all times, for stealth:
Symbol on LCD Screen
bLO (default setting)
bLF
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING BEEPING SOUND ON / OFF
You can set the beeping sound to beep or be silent at all times, for stealth:
Symbol on LCD Screen
bPO (default setting)
bPF
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
CHOOSING NTSC / PAL SETTING
This controls both the video recording frame rate and playback of video from the camera when viewing on a
TV. Select nSC (NTSC) if viewing on a TV in North America. Choose PAL if viewing on a PAL TV (most
televisions outside of North America) or if viewing on a PAL TV in any region.
Symbol on LCD Screen
NTSC TV setting for North America. Camera will record in 60 or 30 frames
nSC (default setting)
per second depending on which resolution is selected.
PAL TV setting for most regions outside of North America. Camera will
PAL
record in 50 or 25 frames per second depending on which resolution is
Press the SHUTTER button to toggle between choices. If a change has been made, the camera will
automatically power off and on again to reset itself into the correct setting.
DELETE LAST FILE SAVED
When "LSt" is on the LCD screen, you can delete the last file saved to the SD card:
Symbol on LCD Screen
To delete last file saved to camera, press SHUTTER button when LSt is on
LSt
screen. LSt will start blinking as a warning.
"LSt" will blink for 5 seconds. If you do nothing..."LSt" will stop blinking and
LSt (blinking)
the file will NOT be deleted. You can press the POWER/MODE button to
TO CHOOSE NO DELETE
advance to the next option in the SET menu.
If you press the shutter button while LSt is blinking, you will delete the last
LSt (blinking)
file saved to the SD card. Red LED on front of camera will blink while the
TO CHOOSE YES DELETE
file is being deleted.
Function
Function
Video Live Feed OFF
Video Live Feed ON
Function
On Screen Display ON
On Screen Display OFF
Function
Function
LED blinking ON
LED blinking OFF
Function
beeping sound ON
beeping sound OFF
Function
selected.
Function
DELETE ALL FILES AND FORMAT SD CARD
When "ALL" is on the LCD screen, you can delete all files and format the SD card:
Symbol on LCD Screen
To delete all files and FORMAT SD card, press SHUTTER button when
ALL
ALL is on screen. ALL will start blinking as a warning.
"ALL" will blink for 5 seconds. If you do nothing..."ALL" will stop blinking and
ALL (blinking)
the SD card will NOT be formatted. You can press the POWER/MODE
TO CHOOSE NO FORMAT
button to advance to the next option in the SET menu.
If you press the shutter button while ALL is blinking, you will format the SD
ALL (blinking)
card, losing all files and data. Red LED on front of camera will blink while
card is being formatted. IMPORTANT: this will format your card and all data
TO CHOOSE YES FORMAT
on the card will be deleted.
AUTO POWER OFF SETTING
You can program the camera to automatically turn off at 60, 120, 300 seconds, or you can set the camera to
OFF to keep the camera on until you manually turn it off.
Symbol on LCD Screen
OFF (default setting)
camera will only turn off if manually turned off
camera will turn off 60 seconds after last button press (unless recording
60
video or shooting automatic photos)
camera will turn off 120 seconds (2 minutes) after last button press (unless
120
recording video or shooting automatic photos)
camera will turn off 300 seconds (5 minutes) after last button press (unless
300
recording video or shooting automatic photos)
Press the SHUTTER button to toggle between choices.
Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
next feature option.
SETTING THE TIME AND DATE
You can set the time and date on the camera as long as the battery stays in the camera. Once the
battery is removed the time and date settings will be lost:
Symbol on LCD Screen
When you see "dAt" on the screen, press SHUTTER button to set the time
dAt
and date.
Press POWER/MODE button to toggle from Y09 (2009) to Y30 (2030).
Y09 - Y30
Press SHUTTER to advance to next date setting.
Press POWER/MODE button to toggle from 01 (January) to 12 (December).
01 - 12
Press SHUTTER to advance to next date setting.
Press POWER/MODE button to toggle from d01 (1st day of month) to d31
d01 - d31
(31st day of month). Press SHUTTER to advance to next date setting.
Press POWER/MODE button to toggle from H00 (12 a.m. military time) to
H00- H23
H23 (11 p.m. military time). Press SHUTTER to advance to next date
setting.
Press POWER/MODE button to toggle from 00 (zero minutes) to 59 (59
00 - 59
minutes). Press SHUTTER to advance to next date setting.
Once you select the "minutes" setting and press the SHUTTER button, you will return to the SEt entrance
for the settings menu.
EXITING THE SETTINGS MENU
When you see ESC on the screen, press the SHUTTER button to exit the SETTINGS MENU.
Function
Function
Function
Hide quick links:
Advertisement
