Advertisement
Quick Links
Advertisement
Related Manuals for Glyph GLTC2F-52
Summary of Contents for Glyph GLTC2F-52
- Page 1 Firewire CDR Quickstart Guide...
-
Page 2: About This Manual
This is not a technical manual. Technical manuals usually include information about the drive mechanism (like drive specs, wiring schematics, pin outs ... stuff like that). Since opening your Glyph enclosure voids your warranty, our documentation covers the setup & use of the product, not the drive inside it. - Page 3 Unpacking, Inspection & General Info Your Glyph WildFire CDR and accessories are packaged in a sturdy shipping container. Please inspect the container for evidence of shipping damage and mishandling. If such evidence is found, file a report with the carrier or dealer immediately and do not attempt to unpack and operate the WildFire CDR until the carrier or dealer confirms the damage.
-
Page 4: Parts Identification
Parts Identification To familiarize yourself with the WildFire CDR, take a moment to study the diagrams below. You will be connecting cables on the drive shortly, so it will be helpful to know the layout of the physical connections. Power Indicator Light CD Tray Headphone... - Page 5 100, 200 and 400 Mbps (Megabits per second). FireWire, unlike SCSI, requires no ID numbers or termination. In almost all Glyph scenarios it is a plug and play solution. Connecting the Glyph WildFire CDR To connect your WildFire CDR drive, locate the following items from your WildFire CDR package: •...
- Page 6 Installing Glyph WildFire CDR Hardware Step 1 - Position the Drive Find a level, solid surface on which to place the unit. Here’s one on Larry’s desk. Step 2 - Connect Power Cable (Power Off) Make sure that the power is off on all of your computer equipment and the WildFire CDR.
- Page 7 CDR and computer you are ready to learn how to use the CD tray and CDR disc. Additional discs are available from your dealer or from Glyph. See page 10 to prepare your Mac.
- Page 8 Disc Handling Always store your CDR Discs in the jewel case when not in use. Some important guidelines include: • Store in a cool dry location. • Do not transport the disc in your WildFire drive when moving the drive. •...
- Page 9 The Audio Jacks The headphone jack and headphone volume control are located on the front panel of the drive. Plug your stereo headphones into the headphone jack for private listening. To play an Audio CD, you must first mount the Audio CD using an applicaion like Toast, then play the Audio CD with Apple’s CD Audio Player application.
- Page 10 While your new WildFire CDR is incredibly simple to install and use, there are a couple of things that have to be true in order for things to go smoothly for you. You must have at least version 2.4 of Apple’s FireWire Enabler, and FireWire Support Extensions.
- Page 11 Your Mission ... should you choose to accept it ... Your Glyph WildFire CDR should now be ready for you to go forth and make the art you were destined to create. Again, the technical support staff is here to help you if you run into problems along the way.
- Page 12 735 West Clinton Street Ithaca, New York 14850 Phone . . (607) 275-0345 Fax ..(607) 275-9464 Technical Support (607)275-0154 www.glyphtech.com sales@glyphtech.com in UK/Europe:The Global Distribution Group PO Box 39, Ashdon, Saffron Waldon, Essex CB10 2FT, England Tel.
Need help?
Do you have a question about the GLTC2F-52 and is the answer not in the manual?
Questions and answers