Advertisement
Assembly
• Place the toy face down.
• Slide the foot into the groove on the back
of the toy. Push to "snap" in place.
Before Use
A plastic tab was attached to the toy for
in-store demonstration purposes. While
the tab may have already been removed,
check the back of the toy to be sure. If
the plastic tab is still attached, pull and
remove the tab from the toy. Throw the
plastic tab away.
Foot
Surprises, Motion, Lively
Music and Sounds
• Locate the power/volume switch on back
of the toy.
• Slide the power switch to: ON with low
volume
, ON with high volume
OFF
.
• Drop a ball into the mouth, then watch it
zig-zag back and forth and roll out at
the bottom.
or
Advertisement
