Table of Contents
Advertisement
The terminal suddenly became
unavailable while using overseas.
･
Check if usage amount exceeds the limit
of maximum charges for use.
For use of "International roaming (WORLD
WING)", the limit of maximum charges for
use is set in advance. If exceeding the limit
of maximum charges for use, pay the
charges.
Cannot receive calls overseas.
･
Is "Restricting incoming calls" set to
"Activate restricting"?
No caller ID is notified/A notified caller ID
is different from that of the caller/
Functions for using contents saved in
phonebook or those using Caller ID
notification do not operate.
･
Even if a caller notifies its caller ID, it is not
displayed on the terminal unless the
network or network operator notifies it.
And a different caller ID may be notified
depending on the network or network
operator you use.
■
Data management
Data transfer is not performed.
･
Check if USB hub is used. If you use USB
hub, operations may not be performed
correctly.
→
P.236
Data saved in microSD card is not
displayed.
･
Remove the microSD card and insert it
→
again.
P.33
When trying to display an image, "
appears instead of it.
u
Or "
" appears for the demo play or the
preview function.
･
u
"
" may appear instead of destroyed
image data.
■
Bluetooth function
The terminal cannot be connected to a
Bluetooth communication device/A
Bluetooth communication device cannot
be found from the terminal.
･
Make Bluetooth communication device
(commercial item) registering stand-by
state and then register the device on the
terminal. If you delete already registered
device and register the device again as a
new device, delete the registrations on
both Bluetooth communication device
(commercial item) and the terminal and
then perform registration of the devices.
→
P.162
u
"
Appendix/Index
243
Advertisement
Table of Contents
