Image-Ii (Computer Mode) - Optoma EP738MX Manual

User Controls
Computer Mode
Language
Image-I
Frequency
Tracking
H. Position
V. Position
Degamma
Aspect Ratio
16:9 Image Position
English ...
22
Management Lamp setting
Image-II Audio
Press Enter to Set
Frequency
"Frequency"changes the display data frequency to match the
frequency of your computer's graphic card. If you experience a
vertical flickering bar, use this function to make an adjustment.
Tracking
"Tracking" synchronizes the signal timing of the display with the
graphic card. If you experience an unstable or flickering image, use
this function to correct it.
H.Position (Horizontal Position)
Press the
4
Press the
4
V. Position (Vertical Position)
Press the
4
Press the
4
Degamma
This allows you to choose a degamma table that has been fine-
tuned to bring out the best image quality for the input.
Aspect Ratio
Use this function to choose your desired aspect ratio.
4:3 : The input source will be scaled to fit the projection
4
screen.
16:9 : The input source will be scaled to fit the width of the
4
screen.
Image-II
(Computer Mode)
to move the image left.
to move the image right.
to move the image down.
to move the image up.