Wheel Tab; Settings Tab - A4Tech RFW-25 User Manual

Wheel Tab

Wheel Mode:
mode radio button to enable both vertical and horizontal wheels. When the
MS-IntelliMouse Compatible mode radio button is selected only the vertical
wheel will function.
Swap Vertical and Horizontal Wheel:
functions of the Horizontal and Vertical Wheels.
Vertical Wheel/Horizontal Wheel:
direction box to change the scrolling direction when you turn the scroll
wheel. Select the Scroll or Scroll one "page" per scroll unit radio button to
set the scrolling speed to suit your work habits.
Wheel Zoom for Office 97/2000:
horizontal wheel to zoom in and out when using applications that support
this function. You can still use the wheel to scroll horizontally by
positioning the cursor over the horizontal scroll bar. When this option is
unchecked, you must press the [Ctrl] key while turning the horizontal wheel
to use the zoom function.

Settings Tab

Command List:
defined Command Menus) that you can assign to either the NetJump or
LuckyJump grids.
NetJump (top grid):
browsing commands. To change a command, select a new one from the
Command List and click on the icon in the grid that you want to change.
LuckyJump (bottom grid):
commands. To change a command, select a new one from the Command
List and click on the icon in the grid that you want to change.
User-defined Command Menu:
command menu to suit your specific needs. Click on New/Update... and
follow the onscreen instructions.
Apply Net/LuckyJump or the User-defined Command Menu you define here
from the Buttons tab.
Executing NetJump Commands
NetJump combines commonly used tasks for Web browsing into one convenient grid and puts them right under the
cursor. To use NetJump, open the Mouse Properties window and select the Buttons tab. Assign NetJump in the
drop-down menu of the button you want. Click OK to close the Mouse Properties window. Now click the assigned
button to open the NetJump grid and execute your command. (See the Settings Tab section above for instructions on
customizing NetJump.)
Executing LuckyJump Commands
LuckyJump combines commonly used tasks for Windows environments into one convenient grid and puts them right
under the cursor. To use LuckyJump, open the Mouse Properties window and select the Buttons tab. Assign
LuckyJump in the drop-down menu of the button you want. Click OK to close the Mouse Properties window.
Now click the assigned button to open the LuckyJump grid and execute your command. (See the Settings Tab
section above for instructions on customizing LuckyJump.)
Select the Enhanced Dual Wheel 4D Wheel function
Check this box to use the
Shows all the available commands (including User-
The NetJump grid groups commonly used Web-
The LuckyJump grid groups all-purpose
Here you can create your own
Check this box to swap the
Check the Reverse scrolling
— 7 —