Table of Contents
Advertisement
Utilizing Images
In addition to using the SnapBridge app to enjoy the captured images, you can also
utilize the images in various ways by connecting the camera to the devices described
below.
Viewing Images on a TV
Printing Images Without a Computer
Transferring Images to a Computer (ViewNX-i)
B
Notes About Connecting Cables to the Camera
Make sure to turn the camera off before connecting or disconnecting cables. Check the
shape and direction of the plugs and do not insert or remove the plugs at an angle.
Make sure that the camera battery is sufficiently charged. If the EH-62F AC Adapter
(available separately) is used, this camera can be powered from an electrical outlet. Do
not, under any circumstances, use an AC adapter other than the EH-62F. Failure to observe
this precaution could result in overheating or damage to the camera.
For information about the connection methods and subsequent operations, refer to the
documentation included with the device in addition to this document.
Connecting the Camera to a TV, Printer, or Computer
Utilizing Images
Images and movies captured with the camera can be viewed on a TV.
Connection method: Connect a commercially available HDMI cable
to the TV's HDMI input jack.
If you connect the camera to a PictBridge-compatible printer, you can
print images without using a computer.
Connection method: Connect the camera directly to the printer's USB
port with the USB cable.
You can transfer images and movies to a computer for viewing and
editing.
Connection method: Connect the camera to the computer's USB port
with the USB cable.
Before connecting to a computer, install ViewNX-i on the computer.
Open the connector
cover.
Insert the plug.
110
Micro-USB connector
HDMI micro connector
(Type D)
Advertisement
Table of Contents
