Tripp Lite PS-406-HGULTRA Owner's Manual

Owner's Manual
PS-406-HGULTRA
Power Strip
Patent Number 7,375,939
Español 4 • Français 6
IMPORTANT SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
WARNING!
Use of this equipment in life support applications where failure of this equipment
can reasonably be expected to cause the failure of the life support equipment
or to significantly affect its safety or effectiveness is not recommended. Do not
use this equipment within oxygen-enriched atmospheres, or within 0.3 m (1 ft.)
of a point at which an oxygen-enriched atmosphere is intentionally vented.
CAUTION!
DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or
adapters that eliminate the connection to ground. The power strip is designed
for indoor use only. Install the power strip away from heat-emitting appliances
such as radiators or heat registers. DO NOT install where excessive moisture or
other conductive contaminants are present. DO NOT connect the power strip to
the output receptacles of an Uninterruptable Power Supply (UPS). Never install
electrical wiring during a lightning storm.
AUTOMATIC OPERATION!
The power strip includes a ground detection circuit with LED for added safety.
When the power strip is plugged into a wall outlet, it detects whether a proper
ground is present. If a proper ground is detected, the green LED illuminates
and AC power is routed to the output receptacles. If a proper ground is not
detected, the LED does not illuminate and AC power is not routed to the output
receptacles. The power strip will distribute AC power only when connected to a
properly grounded AC outlet.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
1
17-04-338-933527.indb 1 5/5/2017 8:14:37 AM