LG W2242T User Manual page 10

Control Panel Functions
Control
AUTO/SET
Button
Power Button
Use these buttons to select or adjust functions in the On
Buttons
Screen Display.
For more information, refer to page A18.
Use this button to make D-Sub or DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub.
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
19 inch monitor : 1440 x 900
20.1/22 inch monitor : 1680 x 1050
Use this button to turn the display on or off.
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes
to amber.
Function
A8