Table of Contents
Advertisement
brightness without changing lighter shades.
-----------------------------------------------------------------------------------------------------------
Note: If the image is very bright or has few shadow areas, adjusting this setting
may not result in any noticeable changes to the image.
8.
Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- 80%, 70%, 60%, or 50%.
--------------------------------------------------------------------------------------------------------------------------
Note: Higher values allow more blue light through. For the best protection select a lower
value.
9.
ACM: Turn ACM on or off. The default is off.
Color
Picture
Gamma
Color
Color Temp.
Audio
R Gain
Gaming
G Gain
OSD
B Gain
System
R Bias
Information
G Bias
Save Setting to...
B Bias
Picture
Color
6-axis Hue
Audio
6-axis Saturate
Gaming
OSD
System
Information
Save setting to...
Save Settint to...
Move
Enter
1.
Press the MENU key to open the OSD.
2.
Using the ▲/▼ keys, select Color from the OSD. Then navigate to the picture element
you wish to adjust.
3.
Use the ◄/► keys to select the setting.
4.
Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard
value for Windows).
5.
Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or
User.
6.
6-axis Saturate: Adjust the red, green, blue, yellow, magenta and cyan saturation.
7.
6-axis Hue: Adjust the red, green, blue, yellow, magenta and cyan hue.
Mode - User
2.2
Warm
Mode - User
Quick Start Mode
50
50
50
50
50
50
13
Advertisement
Table of Contents
