Delay For HDD (Secs)
Allows you to set a delay time for the BIOS to initialize the hard drive as the system boots up.
The adjustable range is from 0 to 15 seconds. (Default: 0)
Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled
displays normal POST message. (Default: Enabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card or
PCI Express graphics card.
PCI
PEG
GA-EP43-DS3LR/DS3L/S3L Motherboard
Sets the PCI graphics card as the first display. (Default)
Sets PCI Express graphics card as the first display.
- 50 -