Advertisement
HOW TO USE
Before first use
Remove all packaging.
It is important to ensure the correct plug adaptor is used when operating
in a country not using the UK 13 Amp socket system. If in doubt, consult a
qualified electrician.
Fill the kettle with water via the spout or you can also fill the kettle by removing
the lid. Ensure the lid is firmly closed after filling.
Check that the water level is between the MIN and MAX lines on the water
gauge.
PLEASE DO NOT OVERFILL THE KETTLE PAST THE MAX LEVEL. DOING SO
POSES A SCALDING RISK.
Place the kettle on its base, Connect the plug to the mains supply and press
the power switch down
The kettle will switch itself off once the water has boiled
If this is the first time you have used the kettle, discard the water from the
first boiling.
4
SK261050POLN_IM.indd 4
11/03/2016 11:27
Advertisement
