Connecting To Bluetooth Devices - Alcatel POP4S Manual

2 Touch More > Mobile networks > Data roaming.
3 In the dialog that opens, mark the checkbox to preset roaming mode to
National roaming only or All networks, or to Disable data usage when
roaming to avoid significant roaming charges if not in use.
4. When data roaming is disabled, you can still perform data exchange with a
Wi-Fi connection (see "6.1.2 Wi-Fi").
To set preferred network mode
1 Touch on the Quick settings bar to get to Settings.
2 Go to More > Mobile networks > Preferred network type.
3 Select 4G/3G/2G as your preferred network mode.
6.1.2 Wi-Fi
You can connect to the Internet when your phone is within the range of a
wireless network. Wi-Fi can be used on your phone even without a SIM card
inserted.
To turn Wi-Fi on and connect to a wireless network
1 Touch on the Quick settings bar to get to Settings, then touch Wi-Fi.
2. Touch the switch to turn on/off Wi-Fi.
3. Turn on Wi-Fi: detailed information of all detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
4. Touch a Wi-Fi network to connect to it. If the network you selected is
secured, you'll need to enter a password or other credentials (contact
network operator for details). When finished, touch CONNECT.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon will
appear on the status bar whenever the phone detects an available wireless
network within range. The following steps activate the notification function
when Wi-Fi is on:
1 Touch on the Quick settings bar to get to Settings.
54
2. Touch Wi-Fi, then touch and select Advanced.
3. Touch the Network notification switch
function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your
preference.
1 Touch on the Quick settings bar to get to Settings.
2 Touch Wi-Fi, then touch and select Add network.
3. Enter the name of the network and any required network information.
4. Touch SAVE.
To forget a Wi-Fi network
The following steps prevent automatic connections to networks which you no
longer wish to use.
1. Turn on Wi-Fi, if it's not already on.
2. In the Wi-Fi screen, long press the name of the saved network.
3. Select Forget network in the dialog that opens.
6.2

Connecting to Bluetooth devices

Bluetooth is a short-range wireless communication technology that you can
use to exchange data, or connect to other Bluetooth devices for various uses.
To exchange data, touch on the Quick settings bar to get to Settings,
then touch Bluetooth. Your device and other available ones will show on the
screen.
You are recommended to use ALCATEL Bluetooth headsets, which have
(1)
been tested and proved compatible with your phone. You can go to
www.alcatel-mobile.com for more information about the ALCATEL
Bluetooth headset.
to activate/deactivate this
(1)
55