Gigabyte GA-8PE667 User Manual page 22

9) F_PANEL (2x10 pins connector)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RES (Reset Switch)
PW (Soft Power Connector)
MSG(Message LED/Power/
Sleep LED)
NC
Ø Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis
front panel to the F_PANEL connector according to the pin assignment above.
10) BAT (Battery)
+
GA-8PE667 Motherboard
1
1
2
1
1
1
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
v Danger of explosion if battery is incorrectly
v Replace only with the same or equivalent
v Dispose of used batteries according to the
- 18 -
1
20
19
CAUTION
replaced.
type recommended by the manufacturer.
manufacturer' s instructions.