Frequency/Voltage Control - Gigabyte GA-8GE800 User Manual

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
CPU Clock Ratio
CPU Host Clock Control
" CPU Host Frequency (Mhz)
" Fixed PCI/AGP Frequency
Host/DRAM Clock ratio
Memory Frequency (Mhz)
PCI/AGP Frequency (Mhz)
DIMM OverVoltage Control
AGP OverVoltage Control
"#$%: Move
F5:Previous Values F6:Fail-Safe Defaults
"Those items will be available when "CPU Host Clock Control" is set to Enabled.
! ! ! ! ! CPU Clock Ratio
Set CPU Ratio if CPU Ratio is unlocked.
!10X~24X
It's depends on CPU Clock Ratio.
! ! ! ! ! CPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot. When
time out occur, system will reset and run at CPU default Host clock at next boot.
!Disable
Disable CPU Host Clock Control. (Default value)
!Enable
Enable CPU Host Clock Control.
! ! ! ! ! CPU Host Frequency (MHz)
!100MHz ~ 355MHz
Incorrect using it may cause your system broken. For power End-User use only!
GA-8GE800 Motherboard
Frequency/Voltage Control
Enter:Select +/-/PU/PD:Value F10:Save
F7:Optimized Defaults
Figure 8: Frequency/Voltage Control
Set CPU Host Clock from 100MHz to 355MHz.
- 44 -
[15X] Item Help
Menu Level &
[Disabled]
100
33/66
[Auto]
266
33/66
[Normal]
[Normal]
ESC:Exit F1:General Help