Advertisement
4
MAINTENANCE
Regular maintenance is important to ensure the continued proper operation and reliability
of the 6010 Ethernet to HDMI Adaptor. Please perform the following tasks periodically:
•
Clean the unit with a soft, dry cloth. Do NOT use any chemical cleaners or Acetone as
these can damage the finished surface. Do not spray any cleaning liquids or water
onto the unit.
•
Ensure that the cable connections are all securely fitted and appropriately retained.
•
Ensure that the mounting bracket is secure on the DIN rail, and reposition if loose.
•
Ensure the cables to the display are not chafing any sharp edges and remain secure
and un-damaged.
5
TROUBLESHOOTING
#
If the unit fails to power on then check:
•
The power feed to that cable is switched on and the fuse to that circuit is not blown
•
That the power cable is undamaged.
If the unit powers on but does not show anything on the connected display, then
check:
•
That the Micro HDMI and HDMI ends of the display cable are both connected correctly
and is not damaged
If the unit does not respond to the touch screen events, then check:
•
That the USB cable is connected correctly and is not damaged
If the unit is unable to find the Poseidon System ensure:
•
That the Poseidon System is turned on, and connected to the ethernet network
•
That the router is turned on and broadcast is enabled
•
That the ethernet cabling is correct, and all switches on the ethernet network are
powered and functioning correctly
If these steps do not solve your problem then contact Oceanic for technical support.
Warning: There are NO user-serviceable components inside the Ethernet to HDMI
Adaptor. Opening the unit will expose sensitive electronics components to adverse
environmental conditions that may render the unit inoperative and will VOID the
warranty. If service is required, please return the unit to Oceanic Systems.
5
6
TECHNICAL SPECIFICATION
As Oceanic Systems are constantly improving their products specifications are subject to
change without notice. Oceanic System's products are designed to be accurate and reliable
however they should only be used as aids to navigation and not as a replacement for
traditional navigation aids and techniques.
6.1 Electrical and Mechanical
Parameter
Value
Operating Voltage
9 to 32 Volts
Power Consumption
X.XA @ 24V
Overall Dimensions
XxYxZ
6.2 Certifications
Parameter
Value
EC 60945
Electromagnetic Compliance
FCC
Part 15B Class A
CE
CE Marked
Comment
Average Operating
mm
6
Advertisement
