Table of Contents
Advertisement
Onboard Serial Port 2
Auto
BIOS will automatically setup the port 2 address (Default Value).
3F8/COM1
Enable onboard Serial port 2 and address is 3F8.
2F8/COM2
Enable onboard Serial port 2 and address is 2F8.
3E8/COM3
Enable onboard Serial port 2 and address is 3E8.
2E8/COM4
Enable onboard Serial port 2 and address is 2E8.
Disabled
Disable onboard Serial port 2.
Serial Port 2 Mode
Normal
Normal operation. (Default Value)
IrDA
Onboard I/O chip supports IrDA
ASK IR
Onboard I/O chip supports ASK IR.
SCR
Onboard I/O chip supports SCR.
SCR option is shown only when there's SCR hardware function is installed.
OnBoard CIR port
Disabled
Disable this function. (Default Value)
Enabled
Enable Onboard CIR port.
CIR Port IRQ
IRQ 3 / 4 / 5 / 10 / 11 / N/A. (Default Value)
OnBoard Parallel port
378
Enable On Board LPT port and address is 378.
278
Enable On Board LPT port and address is 278.
3BC
Enable On Board LPT port and address is 3BC.
Auto
Set On Board LPT port is Auto. (Default Value)
Disabled
Disable On Board LPT port.
Parallel Port Mode
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port. (Default Value)
Normal
Normal Operation.
EPP+ECP
Using Parallel port as Enhanced Parallel Port & Extended Capabilities
Port.
80
BIOS Setup
Advertisement
Table of Contents
