Table of Contents
Advertisement
7VTX Motherboard
Onboard Serial Port 2
Auto
3F8/COM1
2F8/COM2
3E8/COM3
2E8/COM4
Disabled
Serial Port 2 Mode
Normal
IrDA
ASK IR
SCR
SCR option is shown only when there's SCR hardware function is installed.
OnBoard CIR port
Disabled
Enabled
CIR Port IRQ
IRQ 3 / 4 / 5 / 10 / 11 / N/A. (Default Value)
OnBoard Parallel port
378
Enable On Board LPT port and address is 378.
278
Enable On Board LPT port and address is 278.
3BC
Enable On Board LPT port and address is 3BC.
Set On Board LPT port is Auto. (Default Value)
Auto
Disabled
Disable On Board LPT port.
Parallel Port Mode
EPP
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port. (Default Value)
ECP
Normal
Normal Operation.
EPP+ECP
Using Parallel port as Enhanced Parallel Port & Extended Capabilities
Port.
BIOS will automatically setup the port 2 address (Default Value) .
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8.
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
Disable onboard Serial port 2.
Normal operation. (Default Value)
Onboard I/O chip supports IrDA
Onboard I/O chip supports ASK IR.
Onboard I/O chip supports SCR.
Disable this function. (Default Value)
Enable Onboard CIR port.
81
Advertisement
Table of Contents
