Table of Contents
Advertisement
Basic 6 Channel Analog Audio Output Mode
Use the back audio panel to connect the audio output
without any additional module.
STEP 1 :
Connect the front channels to "Line Out",the rear chan-
Line In
nels to "Line In", and the Center/Subwoofer channels
to "MIC In".
MIC In
Line Out
STEP 2 :
After installation of the audio driver, you'll find an
icon on the taskbar's status area. Click the au-
dio icon "Sound Effect" from the windows tray at the
bottom of the screen.
STEP 3 :
Select "Speaker Configuration", and choose the
"6 channel for 5.1 speakers out put".
Disable "Only SURROUND-KIT" and pess "OK".
- 65 -
Technical Reference
Advertisement
Table of Contents
