Advertisement
INSTALLATION GUIDE
Scan to watch installation video
FOR REMOTE KEYLESS ENTRY
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT
NOTICE: Before you start the installation, please make sure to park the truck on a level surface,
!
turn off the truck engine, and remove the key from the ignition.
If you are installing Weather Guard ® Remote Keyless Entry
(RKE), only one wiring harness installation is applicable
based on the vehicle you are installing (check diagrams on
page 10).
For installing the Weather Guard ® Remote Keyless Entry
Upgrade Kit PS8400 or PS8401, please follow one wiring
harness installation section that is applicable for your vehicle
and the Remote Keyless Entry Upgrade Kit installation of the
instruction manual.
MODEL:
PS8400
PS8401
PS8402
PS8403
PS8404
PS8400: To be used with Chevrolet/GMC/RAM Trucks with
the factory trailer towing packages. For Chevrolet/GMC/RAM
trucks without the factory trailer towing package, use
PS8401
For installation of the truck box to the truck bed, please
reference the Weather Guard ® saddle box installation
manual, included in the separate accessory/installation kit
box with your truck box.
WEATHERGUARD.COM
DESCRIPTION:
HITCH WIRE HARNESS
FUSE WIRE HARNESS
4-WAY WIRING HARNESS
SINGLE EXTENSION
SINGLE EXTENSION
Advertisement
Table of Contents
Summary of Contents for Weatherguard PowerSync
- Page 1 Upgrade Kit PS8400 or PS8401, please follow one wiring harness installation section that is applicable for your vehicle manual, included in the separate accessory/installation kit and the Remote Keyless Entry Upgrade Kit installation of the box with your truck box. instruction manual. WEATHERGUARD.COM...
-
Page 2: Table Of Contents
INSTALLATION VIA TOW HITCH FOR CHEVROLET, GMC OR RAM TRUCKS ONLY PAGE 3 SECTION 2 PAGE 4 INSTALLATION VIA FUSEBOX SECTION 3 INSTALLATION OF POWERSYNC RKE - PAGE 5 SADDLEBOX INSTALLATION SECTION 4 KEYFOB AND CONTROLLER PAGE 7 SECTION 5... - Page 3 CABLE ROUTING Truckbox Best practice is to zip tie the cables to existing grommet wiring harnesses or fixed metalwork WEATHERGUARD.COM...
- Page 4 STEP 5 RECONNECT THE BATTERY CABLE ROUTING Truckbox Best practice is to zip tie the cables to existing wiring harnesses or fixed grommet metalwork WEATHERGUARD.COM...
- Page 5 Installation of PowerSync RKE SaddleBox Installation STEP 1 BEFORE ASSEMBLING TO TRUCKBOX Linkage 28” Actuator extension cable 1.1 Loosely insert the 2 screws (#6-32x1/4”) into the latch rod clamp making sure they don’t protrude to 1.3 Secure the actuator to the actuator cover the inside of the clamp.
-
Page 6: Controller
Use the provided Velcro pads to secure the controller to the back section of the partition. TO SPLIT POWER FOR ADDITIONAL POWERSYNC ITEMS IN THE SAME BOX: Attach the 4-way connector to the end of the PowerSync Power cable to split the power connection. WEATHERGUARD.COM... -
Page 7: Keyfob
Controller 3x until red LED activates. Ensure the PowerSync Keyless Entry system is connected to the PowerSync Powercable. Press any Button on the Keyfob 1 time, the LED indicator on the Keyfob will flash and then... - Page 8 Bolt New CAM provided Locked TO SPLIT POWER FOR ADDITIONAL POWER- SYNC ITEMS IN THE SAME BOX Position Attach the 4-way connector to the end of the Replace PowerSync Power cable to split the power Screw connection. WEATHERGUARD.COM...
-
Page 9: Dual Loop Cable
Installation of PowerSync RKE Side Box Installation STEP 3 Guide Bar INSTALLING INTO SIDE BOX Rear Latch 3.1 Secure the dual loop cable provided to the end of the Cover actuator and the #4-40 Shoulder Bolt making sure the cable is looped around the guide bar. - Page 10 WEATHER GUARD ® product except E-LINE Products, which have a 10-year warranty. these products. PowerSync, which has a 3-year warranty. Please call our customer service department toll free at 1.800.456.7865 with any questions or comments. For U.S. Terms and Conditions of Sale please reference form number 78-1117.
Need help?
Do you have a question about the PowerSync and is the answer not in the manual?
Questions and answers