Uclan Denys H.265 Premium User Manual page 7

In the antenna setup menu, you must select the satellites available to you, set the corresponding
LNB settings and DiSEqC switches. Then you can start the search by pressing the red button.
... when the search is over, you will see a list of the channels found.
Channels editor
After searching, you can edit the channel list if you want.
To do this, go to the Channel Editor:
Using the function buttons, you can edit the channel list according to your preferences.
Audio/Video settings
If necessary, you can adjust the format and resolution (quality) of the image, and also configure
the digital audio output using the Audio / Video settings menu:
- Access password
If the receiver asks for an access password, enter it ... By default, the factory password is 0000.