ABB HT604574 Operation Manual page 46

Operation Manual / TPS48-D/E.. - TPS61-D/E..
4 Operation / 4.4 Speed measurement
4.4.2 Replacing the speed sensor
© Copyright 2020 . All rights reserved.
WARNING
Hot cable connector and hot speed sensor
Risk of burning. During operation, the cable connector and the speed
sensor can reach temperatures exceeding 100 °C.
Wear safety gloves when removing the cable connector and speed
u
sensor.
Wear safety gloves to protect against thermal hazards.
Reduce engine performance to the idling speed, then stop the engine.
u
Switch off the lubricating oil supply to the turbocharger.
u
Disconnect the cable connector from the speed sensor.
u
Screw out defective speed sensor.
u
Screw in a new speed sensor up to the limit block.
u
Adhere to tightening torque.
u
Part number TPS48
86505 15 Nm
HZTL2410_EN
TPS52 TPS57
15 Nm 15 Nm
Rev.F
TPS61
15 Nm
March 2020