Gigabyte GA-6RX User Manual page 79

6RX Series Motherboard
Navigating the FastBuild™ Setup Menu
When using the menus, these are some of the basic navigation tips: Arrow keys highlights
through choices; [Space] bar key allows to cycle through options;
[Enter] key selects an option; [ESC] key is used to abort or exit the current menu.
Using the Main Menu
This is the first option screen when entering the FastBuild TM Setup.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Auto Setup .......................................................[ 1 ]
View Drive Assignments...................................[ 2 ]
View Array .......................................................[ 3 ]
Delete Array.....................................................[ 4 ]
Rebuild Array ...................................................[ 5 ]
Controller Configuration ...................................[ 6 ]
To create a new array automatically, follow the steps under "Creating Arrays Automatically" on
page 72. Promise recommends this option for most users.
To view drives assigned to arrays, see "Viewing Drive Assignments" on page 74.
To delete an array (but not delete the data contained on the array), select "Deleting An Array" on
page 81.
To rebuild a mirrored array, see "Rebuilding an Array" on page 83.
To view controller settings, see "Viewing Controller Configuration" on page 85.
NOTE: After configuring an array using FastBuild, you should FDISK and
format the arrayed drive(s) if you are using new, blank drives. Depending on
the type of array you are using.
[ Main Menu ]
[ Keys Available ]
Press 1...6 to Select Option
71
[ESC] Exit