Table of Contents
Advertisement
Hotel Mode
1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu,
please enter the following command (within 2 second).
[TV] : Vol.[Down] + [REMOTE] : AV (3 times)
Then, the Hotel mode setup menu is displayed.
Hotel mode
Hotel mode
Initial INPUT
Initial POS
Initial VOL Level
Maximum VOL Level
Button Lock
Remote Lock
Private Information
Import TV pairing information
Change
Select
RETURN
3. To exit the "Hotel mode":
Switch off the power with the [POWER] button
on the main unit or the [POWER] button
on the remote control or pressing [EXIT] button
on the remote control.
4. Explain the Hotel mode setup menu.
Off
Off
Off
Off
100
Off
Off
Reset
ITEM
Hotel Mode
Select hotel mode ON/OFF
Initial INPUT
Select input signal modes.
Set the input, when each time power is switched on.
Selection:
Off/DVB(B);DVB-T(E)/AV/HDMI1/HDMI2
- Off: give priority to the last memory. However, Euro
Model is compulsorily set to TV.
Initial POS
Select programme number.
Selection:
Off/0 to 99
- Off: give priority to the last memory
Initial VOL Level
Adjust the volume when each time power is
switched on.
Selection/Range:
Off/0 to 100
- Off: give priority to the last memory
Maximum VOL
Adjust maximum volume.
Level
Range:
0 to 100
Button Lock
Select local key conditions.
Selection:
Off/SETUP/MENU
- Off: altogether valid
- Setup: only F-key is invalid
(Tuning guide (menu) can not be selected.)
- MENU: only F-key is invalid
(only Volume/Mute can be selected.)
Remote Lock
Select remote control key conditions.
Selected"
Off/SETUP/MENU
- Off: altogether valid
- Setup: only Setup menu is invalid
MENU: Picture/Sound/Setup menu are invalid
Private
Select private information for VIERA Cast is Keep or
Information
Reset if Hotel mode is set to [On] when TV power
on.
Selection :
Keep/Reset
•Keep: private information for VIERA Cast is keep
•Reset: private information for VIERA Cast is reset
Import TV pairing
Import TV pairing information with USB.
Filename must be "tv_pairing_hotel.txt" located in root
information
directory.
Content of "tv_pairing_hotel.txt":
Pairing ID is "APPID:0x00*****"
--hexadecimal text format (A～F, a～f, 0～9)
--just 18 characters
Pairing Key is "KEY:0x****"
--hexadecimal text format (A～F, a～f, 0～9)
--just 32 characters
e.g.
APPID:0x0041424344484f54454c
KEY:0x454e435259505445444b455941424344
Note:
Introduced secure communication between TV and Hotel
command server.
Only paired Hotel command server can control TV and
command
to TV must be encrypted.
16
Function
Advertisement
Table of Contents
