Table of Contents
Advertisement
A.5 Notices & Limitations:
1.
In order for STR to function properly, several hardware and software
requirements must be satisfied:
A.Your ATX power supply must comply with the ATX 2.01 specification
(provide more than 720 mA 5V Stand-By current).
B.Your SDRAM must be PC-100 compliant.
2. Jumper JP16 is provided to connect to the STR LED in your system
chassis. [Your chassis may not provide this feature.] The STR LED will
be illuminated when your system is in STR sleep mode.
DRAM LED
3.
The following is a listing of popular peripherals which have been
successfully tested, on an individual basis, to function correctly in an STR
environment. NOTE: All combinations of these peripherals have NOT
been tested and therefore we do not warrant any particular combination.
A.
VGA Card:
(1) AGP:
Winfast L2300
(2) AGP:
ATi 3D RAGE Pro AGP 2X
(3) AGP:
ATi RAGE TURBO AGP
(4) AGP:
GA-600
GA-6BX7+
(Indicate)
+
Driver Ver.: 7-1-1998
Driver Ver.: 535
Driver Ver.: 535
Driver Ver.: win95.342
32
Suspend to RAM Installation
STR LED Connector
External.
1
Advertisement
Table of Contents
