Table of Contents
Advertisement
C. Press the "connect" button on the USB receiver as shown,
the Green Power LED will light up, and starts "Blinking".
Note: Removing the batteries will require you to synchronize it with the receiver again
the next time you turn it back on.
D. Immediately Press the "connect" button on the bottom of the
keyboard, If you can't find or see your keys on the screen, follow
the steps below:
1. Unplug and re-plug the receiver
2.Test the device on another USB port or computer.
- 5 -
Advertisement
Table of Contents
Need help?
Do you have a question about the GK-26 and is the answer not in the manual?
Questions and answers