La Crosse Technology WT-3129Bx1 Manual

Atomic wall clock

12 " Atomic Wall Clock

Model: WT-3129Bx1 | WT-3129Sx1

DC: 101316

For information about WWVB, atomic time signal visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

Power up

Select Time Zone and DST ON or OFF.

Insert 1 AA battery into the movement.

OPTIONAL: Insert 2 AA batteries in the side

compartments, for up to 3 year battery life.

For best reception, place clock on a wall that faces

Ft. Collins, Colorado.

During the night, your clock will set itself.

IMPORTANT:

• Hands will move to 12:00 and search for the

atomic time signal.

• If no signal, after 8-10 minutes, clock will run from

12:00.

• Clock will search for atomic time signal again, after

midnight, when signal is strongest.

• Allow up to 5 nights for the clock to receive the

atomic time signal.

Table of Contents

Do you have a question about the WT-3129Bx1 and is the answer not in the manual?

Page 1 • Clock will search for atomic time signal again, after midnight, when signal is strongest. • Allow up to 5 nights for the clock to receive the atomic time signal. Model: WT-3129Bx1 | WT-3129Sx1 DC: 101316 For information about WWVB, atomic time signal visit: www.nist.gov/pml/div688/grp40/wwvb.cfm...
Page 2 • Promptly remove expired batteries. The atomic time signal will override manual settings. Warranty Support La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of Reset: purchase) on this product relating to manufacturing defects in materials &...

Wt-3129sx1