Advertisement
Quick Links
TORQUE MEASUREMENT
2 YEAR WARRANTY
(RESTRICTIONS APPLY)
Imada, Inc. warrants its products to the original purchaser to be free from defects in
workmanship and material under normal use and proper maintenance for two years (one
year for adapters, attachments, batteries, and cables) from original purchase. This warranty
shall not be effective if the product has been subject to overload, shock load, misuse,
negligence, accident or repairs attempted by others than Imada, Inc.
During the warranty period, we will, at our option, either repair or replace defective
products. Please call our customer service department for a return authorization number
and return the defective product to us with freight prepaid.
The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby
disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, non-
infringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or
punitive damages in connection with the use of its products and/or software.
03/09
Find Quality Products Online at:
Digital Torque Tester
Models:
DIS-IP05, DIS-IP5, DIS-IP50, DIS-IP200 & DIS-IP500
INSTRUCTION MANUAL
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com
Advertisement
Related Manuals for Cedar DIS-IP05
Summary of Contents for Cedar DIS-IP05
- Page 1 In no event shall Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or punitive damages in connection with the use of its products and/or software. Models: DIS-IP05, DIS-IP5, DIS-IP50, DIS-IP200 & DIS-IP500 INSTRUCTION MANUAL 03/09 GlobalTestSupply www.
-
Page 2: Read First: Safety Information
TORQUE MEASUREMENT TORQUE MEASUREMENT Digital Torque Tester DIMENSIONS DIMENSIONS Accuracy: ±0.5% F.S., ±1 LSD DIS-IP Model lbf-in lbf-ft kgf-cm kgf-m N-cm DIS-IP05 0.020~4.400 — 0.020~5.000 — 0.20~50.00 — DIS-IP5 0.20~44.00 — 0.20~50.00 — 2.0~500.0 0.020~5.000 DIS-IP50 2.0~440.0 — 2.0~500.0 —... - Page 3 TORQUE MEASUREMENT TORQUE MEASUREMENT Comport signal POWER Press to turn on, press again to turn off (click once, do 8 data, 2 stop, no parity. Baud Rate: 19,200 bps. not hold). After 10 minutes of non-use the unit shuts off. MODE Select Real Time, PP (Peak), PD (Peak Down) or C Output Connector (Continuous Output mode)
-
Page 4: General Operation
TORQUE MEASUREMENT TORQUE MEASUREMENT GENERAL OPERATION IMPORTANT! Always make sure that the sensor is mounted securely to a stable workbench to avoid spinning and possible accident. 1. Connect the torque sensor to the tester dis- play unit with cable provided. When con- necting the cable to the torque sensor, rotate the round connector to find the matching groove, then push in until it makes positive... - Page 5 TORQUE MEASUREMENT TORQUE MEASUREMENT OUTPUT PROGRAMMING Press POWER to turn on. Press PRG/SET for one second. The display USB Virtual COM Port shows, "HI" and then the High setpoint value. This confirms the When the tester is connected to a computer’s USB port and turned tester is ready for the following programming steps.
-
Page 6: Data Memory
If the battery is empty, power is turned off immediately. Storing and Recalling Data from Memory IMPORTANT! Use the provided CEDAR AC adapter/charger Memory functions work in PP and PD modes. Store up to 800 val- exclusively and plug into the correct AC output. It takes 3 ues in memory.