Advertisement
Quick Links
TORQUE MEASUREMENT
2 YEAR WARRANTY
(RESTRICTIONS APPLY)
Imada, Inc. warrants its products to the original purchaser to be free from defects in
workmanship and material under normal use and proper maintenance for two years (one year
for adapters, attachments, batteries, and cables) from original purchase. This warranty shall not
be effective if the product has been subject to overload, shock load, misuse, negligence, accident
or repairs attempted by others than Imada, Inc.
During the warranty period, we will, at our option, either repair or replace defective products.
Please call our customer service department for a return authorization number and return the
defective product to us with freight prepaid.
The foregoing warranty constitutes the SOLE AND EXCLUSIVE WARRANTY, and we hereby
disclaim all other warranties, express, statutory or implied, applicable to the products and/or
software, including but not limited to all implied warranties of merchantability, fitness, non-
infringement, results, accuracy, security and freedom from computer virus. In no event shall
Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or punitive
damages in connection with the use of its products and/or software.
Specifications subject to change without notice.
Distributed by: ABQ Industrial LP USA
Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451
Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net
Digital Torque
Screwdriver/Tester
Models: DIS-RL2 & DIS-RL10
INSTRUCTION MANUAL
Advertisement
Related Manuals for Cedar DIS-RL2
Summary of Contents for Cedar DIS-RL2
- Page 1 In no event shall Imada, Inc. and/or its affiliated companies be liable for any incidental, consequential or punitive damages in connection with the use of its products and/or software. Models: DIS-RL2 & DIS-RL10 INSTRUCTION MANUAL Distributed by: ABQ Industrial LP USA Tel: +1 (281) 516-9292 / (888) 275-5772 eFax: +1 (866) 234-0451 Web: https://www.abqindustrial.net E-mail: info@abqindustrial.net...
- Page 2 TORQUE MEASUREMENT TORQUE MEASUREMENT Digital Torque Tester/Wrench DIMENSIONS DIS-RL Model DIS-TW20 Accuracy: ±0.5% F.S., ±1 LSD Model Capacity lbf-in kgf-cm N-cm DIS-RL2 0.10~17.40 0.10~20.00 1.0~200.0 — DIS-RL10 1.0~90.0 1.0~100.0 10~1000 0.10~10.00 List of Equipment Torque Tester Display Unit Screwdriver Sensor...
- Page 3 TORQUE MEASUREMENT TORQUE MEASUREMENT Comport signal POWER Press to turn on, press again to turn off (click once, do 8 data, 2 stop, no parity. Baud Rate: 19,200 bps. not hold). After 10 minutes of non-use the unit shuts off. MODE Select Real Time, PP (Peak), PD (Peak Down) or C Output Connector (Continuous Output mode)
-
Page 4: General Operation
TORQUE MEASUREMENT TORQUE MEASUREMENT GENERAL OPERATION 1. Connect the torque sensor to the tester display unit with cable provided. When connecting the cable to the torque sensor, rotate the round connector to find the matching groove, then push in until it makes positive connection (When disconnecting the cable from the torque sensor, hold the silver metal part of the round connector and pull out). - Page 5 TORQUE MEASUREMENT TORQUE MEASUREMENT OUTPUT PROGRAMMING Press POWER to turn on. Press PRG/SET for one second. The display USB Virtual COM Port shows, "HI" and then the High setpoint value. This confirms the When the tester is connected to a computer’s USB port and turned tester is ready for the following programming steps.
-
Page 6: Data Memory
If the battery is empty, power is turned off immediately. Storing and Recalling Data from Memory IMPORTANT! Use the provided CEDAR AC adapter/charger Memory functions work in PP and PD modes. Store up to 800 val- exclusively and plug into the correct AC output. It takes 3 ues in memory.