Summary of Contents for Summit Professional SWC1875B
Page 1
WINE CELLARS Model Nos.: SWC1535B/SWC1102/SWC1875B/SWC1926/SWC1966 Instruction Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Felix Storch, Inc. Write Serial No. (on lower left corner of 770 Garrison Avenue inside cabinet) here: Bronx, NY10474 www.summitappliance.com ___________________________________________...
Reversing the Door Swing of Your Appliance 9-11 Installing the Stainless Steel Handle Operating Your Appliance 12-16 Recommended Temperature Settings Control Panel for SWC1535B/SWC1102/SWC1926 12-13 Control Panel for SWC1875B/SWC1966 13-14 Interior Light Sabbath Mode 14-15 Temperature Memory Function Temperature Alarm / Door Alarm Door Lock...
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others.
Page 4
- Avoid open flames and anything that creates a spark, - Disconnect from the electrical power line, - Air the room in which the appliance is located for several minutes, and - Contact the Service Department for advice. • The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up.
LOCATION OF PARTS MODEL SWC1535B Digital Control Panel Door Shelves(6) Handle Security Lock Ventilation Grille Adjustable Legs Cabinet MODEL SWC1875B Digital Control Panel Upper Door Handle Upper Zone Security Lock Lower Door Lower Zone Shelves (14) Ventilation Grille Adjustable Legs...
Page 6
MODEL SWC1102 Digital Control Panel Handle Shelves (12) Door Security Lock Ventilation Grille Adjustable Legs Cabinet MODEL SWC1926 Digital Control Panel Door Handle Shelves (15) Security Lock Ventilation Grille Adjustable Legs Cabinet...
MODEL SWC1966 Door Digital Control Panel Handle Shelves (14) Security Lock Ventilation Grille Adjustable Legs Cabinet INSTALLATION INSTRUCTIONS BEFORE USING YOUR APPLIANCE • Remove the exterior and interior packing. • Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
This unit is designed for either built-in or free-standing installation. If you plan to use the unit in a built-in application,use the following dimensions for the enclosure: Model SWC1535B SWC1102 SWC1875B SWC1926/SWC1966 Width 15¾” / 40 cm 23.8” / 60.5 cm 23.8”...
EXTENSION CORD Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Page 10
Model SWC1875B 9 10 1. Remove the bottom hinge 1 by unscrewing the four lock screws 2. Be careful to hold the lower glass door firmly after removing the screws. Then gently pull down to remove the lower glass door from the middle hinge 8 and place it on a padded surface to avoid the risk of damage.
Page 11
9. Remove the handles from the left side of the doors and install them on the right side. (See page 12.) Model SWC1102/SWC1926/SWC1966 1. Remove the bottom hinge 1 by unscrewing the four lock screws 2. Be careful to hold the glass door firmly after removing the screws.
INSTALLING THE STAINLESS STEEL HANDLE This appliance includes a stainless steel handle that is not required to operate the unit. To install the handle, follow the instructions below: Locate the handle 1 over the pins 3 of the door and tighten the handle by screwing in screws 2 with an Allen wrench.
5 seconds. After 5 seconds, the temperature inside the unit will reappear in the display window. CONTROL PANEL for SWC1875B / SWC1966 ON/OFF Power To turn the appliance ON or OFF, touch the symbol and hold for 5 seconds.
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds. Setting the Temperature Control • The unit has two separate temperature zones. The temperature of both zones can be set between 41ºF and 72ºF (5ºC and 22ºC). The LOWER temperature zone is ideal for storing red and white wines at a setting of 55°F to 72°F (13°C to 22°C).
To initiate Sabbath mode, press the POWER and LIGHT keys at the same time for at least 5 seconds. The indicator light will flash four times and confirm the Sabbath mode is ON. Sabbath mode can be exited by repeating the above process. The Sabbath Mode will automatically turn off after 96 hours.
drainage channel behind the rear wall of the unit, and flows through the drainage hole into the drip tray by the compressor where it evaporates. • However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high humidity location.
CARE AND MAINTENANCE CLEANING YOUR WINE CELLAR • Turn off the power, unplug the appliance, and remove all items, including shelves. • Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking soda to a quart of water). •...
TROUBLESHOOTING You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. Troubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY • Appliance is not connected to a power •...
Page 19
• The appliance is not properly level. • Level the appliance with the adjustable feet. The door will • Check the door hinge and reassemble • The door was reversed and not properly not close correctly. installed. properly. • Clean the door gasket. •...
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company.
Need help?
Do you have a question about the SWC1875B and is the answer not in the manual?
Questions and answers