HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output HDMI SWITCH SPLITTER Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1.0 INTRODUCTION The HDMI SWITCH SPLITTER Matrix routes high definition video in multiple resolutions up to 1080p plus multichannel digital audio from any of the four HDMI sources to two...
HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output 2.0 SPECIFICATIONS Signal Inputs/Output Input Video Signal 5 Volts p-p (TTL) Maximum Single Link Range 1920x1080P Output Video HDMI HDMI Input/Output Connector Type A 19 pin Operating Frequency Vertical Frequency Range 50/60Hz Video Amplifier Bandwidth 2.25Gbps/225MHz Resolutions(HDTV)
HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output 4.0 PANEL DESCRIPTIONS 5.0 CONNECTION AND OPERATION 1) Connect four source devices HDMI outputs into this product 2) Connect this product HDMI outputs to two sink devices 3) Connect this product audio outputs to Amplifiers 4) Insert the DC side of 5v power supply into this product and then connect the AC side of the power supply into the wall outlet.
Page 5
HDMI SWITCH SPLITTER 4×2 (matrix) with Audio output The button 1、2、3、4 can select source devices freely. The Mute button will control the Audio output from Stereo, Toslink and Coaxial Audio Output Select “2CH” and “5.1CH” can be selected using Remote control for outputA. 5.1CH audio can be sent by Toslink and Coaxial Note:...