Table of Contents
Advertisement
en Installation instructions
Installing the appliance
Insert the appliance into the opening in the fitted
1.
unit
and screw it to the fitted unit
Tighten the fastening screws.
2.
Attach the frame and screw it to the appliance from
3.
below.
Secure the frame and the appliance with screws.
4.
If the screws are not accessible from the exterior,
the screws can also be fitted from the interior.
14
5.
.
6.
7.
Establishing the exhaust air connection
1.
2.
3.
Establishing the connection for the circulated
air
1.
2.
3.
4.
Connecting to the power supply
1.
2.
Restore the control panel cabling and the cabling
for the lighting.
The plug can only be inserted into one position.
Fit the grease filters.
To avoid causing damage, do not bend the grease
filters.
Attach and close the filter cover.
Secure the exhaust pipe to the air pipe connector.
Establish the connection to the exhaust air opening.
Seal the joints.
Secure the exhaust pipe to the air pipe connector.
Connect the pipe to the opening on the fitted unit.
Screw the air guide grille to the fitted unit.
Seal the joints.
Insert the mains plug into the protective contact
socket.
If a fixed connection is required, follow the instruc-
tions in the section
→ "Instructions for the electrical connection",
Page 12.
Advertisement
Table of Contents
