Using The Battery Pack - Gigabyte T1000P User Manual

1.13 Using the Battery Pack

T1000 series netbook is designed to operate with one of the
following power sources:
„ AC power (using the AC adapter connected to an electrical
outlet)
„ Lithium-Ion (Li-Ion) battery pack
You should use the AC adapter whenever possible; use the battery
pack only when AC power is unavailable. The rechargeable Li-Ion
10
battery pack allows you to operate your T1000 computer without an
external power source. When you use the AC adapter to connect
your T1000 to a power outlet, the internal battery will begin to
recharge. While the battery is charging, the Battery Charge icon on
the indicator panel will be on. Once the battery is fully charged, the
Battery Charge icon will turn off.
„ Operating video, or audio equipment can increase the use of
your computer's power.
„ Decreasing monitor brightness can also save power.
„ When the battery is not fully charged, allow your battery to be
charged completely before using it (i.e., before disconnecting AC
power).
„ The battery will not be charged when remaining battery is higher
than 95% (The battery will be charged to 100% when remaining
battery is less than 95%).
„ Li-Ion Battery is vulnerable; do not charge it with other power
adapter, otherwise fire or explosion may occur.
Replacing the Battery
The battery will gradually weaken over time. We recommend that
you replace your battery when you notice a significant decrease of
battery capacity.
To change the battery pack, follow the steps below:
1. Turn off the computer.
2. Close the lid and flip the computer over.
3. Slide the battery latch. Continue to hold it until the battery is
removed.
4. Make sure the replacement battery is properly oriented before
inserting it into the battery compartment.
Maintenance of the AC Adapter
„ Do not connect the adapter to any other device.
„ Do not step on the power cord or place heavy objects on top of it.
Carefully route the power cord and keep cables away from all traffic.
„ When unplugging the power cord, do not pull on the cord itself but on
the plug instead.
„ If you are using an extension cord, make sure that the devices
plugged onto the cord do not exceed its total capacity. Furthermore,
the devices plugged into the electrical outlet shall not exceed the fuse'
s total ampere rating.
„ Please verify power voltage before connecting the electrical cord to
the power outlet. If you are uncertain of its power specification, please
consult with your local vendors or power company for more details.