Table of Contents
Advertisement
5.5 Using the External Audio System
At the rear side of your notebook computer G-MAX N203, you will find the
built-in audio ports. You can connect Microphone jack, earphone or powered
speaker.
To connect to a audio jack:
1.
Locate the audio port (Microphone, Headphone) that you want to use to
the target device.
2.
Plug the jack into the port on the rear side of the system.
Note: If you use external speakers and experience the sound distortion or
feedback, please lower the volume. Some factors is caused by too close
locating the microphone and speakers from each other, moving away the
external audio option from the unit may also help.
5.6 Using the LAN Port
Your notebook computer G-MAX N203 comes with a internal 10 Base-T/100
Base-TX LAN module that connects your notebook computer G-MAX N203 to
other computers/networks through a local area network (LAN) and supports
data transfer rates at 10 Mbps and can be up to 100 Mbps. The 10Base-T
standard also called Twisted Pair Ethernet is connected with RJ-45 connectors.
The 100 Base-TX is based on the older Ethernet standard. Because it is 10
times faster than Ethernet, it is often referred to as Fast Ethernet.
The built-in LAN module provides a standard RJ-45 connector.
To connect the twisted-pair cable to your LAN port:
1.
Locate the twisted-pair cable in the accessories box in notebook shipping
carton. Each end of the cable has a RJ-45 connector.
2.
Connect one end of the cable into the network wall outlet or HUB.
3.
Connect the other end of the cable into the computer RJ-45 LAN port.
G-MAX
69
TM
N203 User's Manual
Advertisement
Table of Contents
