Advertisement
Available languages
Available languages
Thank you for choosing a Proel product, and for your confidence towards our brand, synonymous with professionalism, high quality and reliability.
Description
Professional table microphone, high sensitivity condenser microphone capsule, flexible gooseneck, illuminated ring to indicate operating condition,
and on/off switch*. Perfect for all PA applications, such as conference and paging. It can be powered by battery or as by Phantom power. The base is
equipped with 8 meters of cable XLRF-XLRM and XLRF-mono jack adapter
This product complies with CE directives.
Precautions
WARNING
To avoid risk of electric shock, please don't open the
product.
To prevent risk of fire or electric shock, don't expose
this product to water and/or moisture.
•
Before installing this unit please carefully read these instructions, and keep this owner's manual for future reference.
•
WARNING: improper installation could irreparably damage the unit.
•
Be careful that unit operation may not cause damage to people.
•
Place the unit in a location protected from weather and far from water and moisture.
•
Don't place this unit close to heat sources (radiators, spotlights, amplifiers etc.)
•
Avoid any liquid entering inside the unit
•
No user-serviceable parts inside. Refer servicing to an authorized maintenance centre only.
Installation
1.
Insert two AA 1,5V batteries in battery compartment under the microphone base, respecting the polarity indicated inside the compartment.
Note: using Phantom power, batteries are not necessary.
2.
Being careful about mounting direction, insert the gooseneck connector on microphone base surface XLR connector.
3.
Connect microphone base to an external unit (mixer, amplifier, etc.) using supplied cable. If the external unit microphone input can supply
Phantom power, apply it to this microphone by switching Phantom power on.
Note: before connecting the microphone to the external unit, it must be turned off and with its volume settings at minimum.
4.
First of all turn on the microphone, then the unit and adjust its volume do desired level.
5.
In order to obtain a perfect sound reproduction, the user should maintain a distance between 5 cm. (2") and 30 cm. (12") from microphone
capsule.
Operating suggestions
•
If the microphone is placed too close to speaker or its capsule is oriented towards a speaker, it could generate feedback (Larsen effect). Avoid
placing the microphone too close to the speaker, and avoid orienting its capsule toward the speaker. IF, despite these practises, you hear
feedback, please lower speaker volume.
•
It's important to keep the anti-pop foam clean; foreign particles on the foam could modify frequency response. Periodically wash the anti-pop
foam using warm water with mild soap, rinse the foam with clean water, then let the foam dry thoroughly before placing it again on the
microphone.
•
Due to the microphone's very high sensitivity, be careful the microphone isn't dropped and avoid shock, as it could be damaged.
•
In order to maintain sensitivity and performance, avoid exposing the microphone to moisture or high temperatures.
•
Use new batteries of high quality only; the use of discharged and/or low quality batteries could cause leakage of chemical substances that
could damage the unit.
Technical Specifications
Model
Microphone type
Polar pattern
Sensitivity
Frequency response
Power supply
Controls
Output connector
Output Impedance
Gooseneck length
Dimensions (WxHxD)
Weight
Supplied cable
La Proel SpA persegue una politica di costante ricerca e sviluppo, di conseguenza si riserva il diritto di apportare miglioramenti ai
prodotti esistenti, senza preavviso e in qualunque momento
BMG2
Electrete
Cardioid
-40dB±2dB
40Hz-20kHz
Phantom 48V DC or 3V (2 x 1,5V AAA type batteries)
ON/OFF switch
XLR Male
75Ω
445 mm
115x30x140 mm
0,73 Kg
XLRF-XLRM 8 meters
REV.01 09/13
3
Advertisement
