Table of Contents
Advertisement
Symbol
Function
WLAN signal strength
•'ˆ
Not connected to home network (WLAN).
‹
Signal strength 1 (poor)
‚
Signal strength 2 (moderate)
ƒ
Signal strength 3 (good)
„
Connection to Home Connect server
•'‰
Not connected.
‹
Connected.
‚
* Basic setting
Notes
The
setting is only displayed if the appliance is
•'ƒ
■
connected to the home network.
The
setting is only displayed if the appliance
•'„
■
has once connected to a network.
The
setting is only displayed if an update is
•'†
■
available.
The
setting is only displayed if Customer
•'‡
■
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
The
and
•'ˆ
•'‰
■
there is a connection to WLAN.
Deactivating WLAN
If WLAN is activated, you can use the Home Connect
functions.
In networked standby mode, your appliance
Note:
requires max. 2 W.
Touch the
symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
lights up on the cooking position display.
‚
Set the
‹
value on the control panel.
3.
WLAN is deactivated and the
panel goes out.
settings are only displayed if
•'„
symbol on the control
D
Disconnecting from the network
Y ou can disconnect your hob from the network at any
D i s c o n n e c t i n g f r o m t h e n e t w o r k
time.
If your hob is disconnected from the network, it is
Note:
not possible to operate it using Home Connect.
Touch the
0
symbol for 4 seconds.
1.
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
lights up on the cooking position display.
„
Set the
value on the control panel.
‹
3.
The appliance is disconnected from the home network
and the
symbol on the control panel goes out.
D
Connecting to the network
Touch the
0
symbol for 4 seconds.
1 .
C o n n e c t i n g t o t h e n e t w o r k
Product information will be displayed.
Touch the
symbol repeatedly until the
0
2.
setting appears.
lights up on the cooking position display.
‹
On the control panel
3.
set the "Connect automatically"
or the "Connect manually"
Follow the instructions in the section entitled
4.
"Automatic registration in the home network" or
"Manual registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
Touch the
symbol for 4 seconds.
0
1.
Product information will be displayed.
Home Connect
•'‚
•'‚
‚
value or
value.
ƒ
en
29
Advertisement
Table of Contents
