Advertisement
Operation
1. Connect the unit to a power supply and switch on.
2. The unit will be in standby mode and sound a 'beep beep' once
connected to the power supply. The ON/OFF indicator light will
illuminate.
3. Press the ON/OFF button to turn the unit ON.
4. The unit defaults to: Low Power, no swing and a temperature setting
of 25°C.
5. Press the Mode button to change the setting. The mode is changed
in sequence: Low Power, High Power & Fan mode. The respective
indicator light will illuminate to show what mode is selected.
6. Press the ECO button to put the unit into ECO Mode.
7. Press the TIMER button once, to set a time for the unit to turn off
automatically. The number will flash on the LED display when the
time is ready to be set. Time is set in 1 hour increments, and can be
set up to 12 hours. Press the '+/-' buttons to set the desired time.
8. Press the temperature button twice to set the temperature. The
numbers will flash on the LED display when the temperature is ready
to be set. The temperature can be set between 5-35°C. Press the
'+/-' buttons to set the desired time.
9. Press the MOVEMENT SENSOR button to activate this mode. Press
again to deactivate this mode.
10. Press the ON/OFF button to turn the unit off. It will take approx. 10
seconds for the fan to turn off and enter standby mode.
Advertisement
