LG CineBeam AI ThinQ Owner's Manual page 152

100
[High Altitude]
(Q. Settings)
If the projector is used at an altitude higher than 1200 meters (3937.0 feet), turn this
on.
Otherwise, the projector may overheat or its protection function may be activated. If
this happens, turn the projector off and then on again after waiting for several minutes.
•
Some models may not be supported.
[Home/Store Mode]
(Q. Settings)
You can choose between [Home Mode] and [Store Mode].
To use the projector at home, select [Home Mode].
Select [Store Mode] only when the projector will be displayed in store. The [Store
Mode] provide settings optimized for store display.
[Reset to Initial Settings]
(Q. Settings)
Return projector to its initial settings. This will revert all settings to their default values.
After reset, the projector will automatically turn off and on.
•
If [Safety] is set to [On], you should type the password to [Reset to Initial
Settings].
• Do not turn off the power during initialization.
•
We recommended that you reset the projector to [Reset to Initial Settings]
before you sell it or transfer it to a third party.
[General] [Additional Settings]
[General] [Additional Settings]
[General] [Reset to Initial Settings]
[High Altitude]
[Home/Store Mode]