Table of Contents
Advertisement
Changing the View Mode Settings
You can resize the video content to fit while the menu is open.
To change the on-screen menu language:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight View Mode
and press OK. The VIEW MODE
menu is displayed.
4. Highlight your Viewport,
Overlapped, or Overlapped
Right and press OK.
• Viewport - The left-hand
portion of the picture
covered by the menu.
• Overlapped - The entire
picture is visible in the
space to the right of the
menu.
• Overlapped Right - The picture extends off of the right
side of the screen.
5. Press the EXIT button on the remote. See Viewing Video
with the Menu Open on page 23 for an alternate way of
resizing the video content.
VIZIO
VIEW MODE
Viewport
Overlapped
Overlapped Right
47
Adjusting the CEC Settings
The CEC function on your TV enables you to control
HDMI-connected devices with the included remote without any
additional programming.
Not all HDMI devices support CEC. See your device's
user manual for details.
Wide
Zoom
Normal
Panoramic
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is
Exit
2D
3D
displayed.
2. Use the Arrow buttons on the remote to highlight System
ABC
and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and
Input
Wide
CC
press OK. The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
Sleep
• CEC - To use CEC, you must select On.
Picture
Audio
Timer
• System Audio Control - When system audio control is on,
you can control your device's audio using the TV's remote
control.
Network
Settings
Help
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.
5. Press the EXIT button on the remote.
5
Advertisement
Table of Contents
