Neo-Pure RO-4300RX Quick Start Manual

Neo-Pure
®
Reverse Osmosis Drinking Water System
1
2. Water carrying the rejected contaminants exits the
2. Water carrying the rejected contaminants exits the
manifold through the center port marked Drain. The
manifold through the center port marked Drain. The
black tubing with the flow restrictor connects to this port.
2. Water carrying the rejected contaminants exits the
black tubing with the flow restrictor connects to this port.
2. Drain Outlet To Air-Gap Connection
The other end connects to the smaller barb connection
manifold through the center port marked Drain. The
The other end connects to the smaller barb connection
on the airgap faucet.
black tubing with the flow restrictor connects to this port.
on the airgap faucet.
The other end connects to the smaller barb connection
Water carrying the rejected contaminants exits the manifold
on the airgap faucet.
through the center port marked Drain. The black tubing
with the flow restrictor connects to this port. The other
end connects to the smaller barb connection on the
airgap faucet.
3. RO water out
3. RO water out
3. RO water out
3
3/8"
3/8"
RO-4300RX Pharmacy Trusted
1. Feed supply connection
1. Feed supply connection
1. Feed supply connection
Post Filter
Post Filter
3/8"
Post Filter
1/4"
1/4"
1. The RO system is fed by connecting the angle
1. The RO system is fed by connecting the angle
1. Feed Supply Connection stop adapter to the cold supply line under the sink.
stop adapter to the cold supply line under the sink.
This connects directly to the manifold through the
1. The RO system is fed by connecting the angle
This connects directly to the manifold through the
left port marked IN
stop adapter to the cold supply line under the sink.
left port marked IN
The RO system is fed by connecting the angle stop adapter to
This connects directly to the manifold through the
the cold supply line under the sink. This connects directly
left port marked IN
to the manifold through the left port marked IN.
2. Drain outlet to Air-gap connection
2. Drain outlet to Air-gap connection
Flow restrictor
Flow restrictor
3. Ro Water Out
RO water exits the manifold through the right
3. RO water exits the manifold through
hand port marked 'out'. This 1/4" line connects
the right hand port marked 'out'. This
to the reducing tee included with the installation 3. RO water exits the manifold through
1/4" line connects to the reducing tee
the right hand port marked 'out'. This
kit. The run part of the tee (3/8") connects to
1/4" included with the installation kit. The
1/4" line connects to the reducing tee
the tank and the other side to the post filter.
run part of the tee (3/8") connects to
included with the installation kit. The
the tank and the other side to the post
run part of the tee (3/8") connects to
filter
the tank and the other side to the post
filter
Quick Start
Guide
2. Drain outlet to Air-gap connection
2
Flow restrictor
3. RO water exits the manifold through
the right hand port marked 'out'. This
1/4" line connects to the reducing tee
included with the installation kit. The
run part of the tee (3/8") connects to
the tank and the other side to the post
filter