Gigabyte B450M S2H User Manual page 33

& SATA Mode
Enables or disables RAID for the integrated SATA controllers or configures the SATA controllers to AHCI
mode.
RAID Enables RAID for the SATA controller.
AHCI C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& NVMe RAID mode (M2A_SOCKET Connector)
Allows you to determine whether to use your M.2 NVMe PCIe SSDs to configure RAID. (Default: Disabled)
& APU SATA Port Enable (M2A_SOCKET Connector)
Enables or disables the SATA controller integrated in the CPU. (Default: Enabled)
& Chipset SATA Port Enable (SATA3 0, 1, 2, 3 Connectors)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& APU SATA Port 0 (M2A_SOCKET Connector)
Displays the information of the connected M.2 SATA device(s).
& Chipset SATA Port 0/1/2/3 (SATA3 0, 1, 2, 3 Connectors)
Displays the information of the connected SATA device(s).
- 33 -