Epson LabelWorks LW-Z900 User Manual page 29

Creating Sequentially Numbered Labels
The number is automatically incremented each time a label
is printed. Up to four digits including numbers (0 to 9) and
alphabet letters (a to z and A to Z) can be entered.
1. Press .
2. Enter the start value of the sequential numbers and
then press .
In this example, we will enter "0001".
3. Select the number of repetition with
then press .
In this example, we will select "2 times".
4. Press + .
5. Select "Print copies" with
.
6. Enter the number of print copies and then press
In this example, we will enter "6".
7. Select "Start print?" with
.
Printing starts.
Creating Labels with Block Sequence Numbers
Assigned
/ and
/ and then press
.
/ and then press
Creating Special Labels
+
You can assign sequential numbers to blocks.
Up to four digits including numbers (0 to 9) and alphabet
letters (a to z and A to Z) can be entered.
Block 1 Block 2
Create the blocks in advance. "Adding Block"
In this example, we have created three blocks.
1. Press + .
2. Enter the start value of the sequential numbers and
then press .
In this example, we will enter "CN01".
Sequential numbers are automatically assigned to block
2 and block 3.
3. Select the number of repetition with
then press .
In this example, we will select "1 time".
4. Press .
Block 3
/ and
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
29