A4Tech RFSW-35 User Manual page 6

When the driver installation is finished your
computer reboots and the RF-Mouse
window (shown on the right) appears.
CONNECT ID: Move the RF-Mouse for a
few seconds to establish a connection, then
click Connect ID. The unique ID code of
your mouse is recognized and another RF
pointing device will not function on your
computer.
Exit: Click Exit if no other RF pointing
devices are within 3 meters range or if you
want other RF pointing devices to be able to
access your computer.
Changing the RF-Mouse ID Code
You can use a new RF-Mouse on your computer without changing the Radio receiver;
you just need to change the ID code. Refer to the following:
1. Press [Shift + Alt + F11] or [Shift + Alt + F12] to call up the RF-Mouse ID Code
window.
2. Move the RF-Mouse for a few seconds to establish a connection, then click Connect
ID.
3. The new ID code is Connected and the RF-Mouse window closes.
4. Click Exit to close the RF-Mouse ID code window.
Identifying Components
The mouse is designed to fit snugly into your hand. The scroll
wheel is positioned on the top allowing for easy operation with
the index finger. Standard mouse buttons are positioned to either
side of the scroll wheels and can be reached comfortably with the
index and ring fingers. A third button is placed under the vertical
wheel and can be easily clicked by pushing down on the wheel.
The following pages will tell you how to configure the scroll
wheels and buttons to suit your specific needs.
Cleaning the Mouse
Clean the mouse regularly to ensure efficient operation. Refer to the following:
— 5 —