LG FH2G6TDY Series Owner's Manual page 26

Spin
• Spin speed level can be selected by pressing the Spin
button repeatedly.
• Spin Only
1
Press the Power button.
2
Press the Spin button to select RPM.
3
Press the Start/Pause button.
NOTE
• When you select 'No Spin', it will still rotate for a
short time to drain quickly.
Rinse
Rinse Hold
The cycle is paused until start button is pressed again
when rinse is finished.
Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected cycle. Press
this button until the desired setting is lit. All rinses use
cold tap water.
• Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
26
Child Lock
Select this function to lock the buttons on the control
assembly to prevent tampering.
Locking the control panel
1
Press and hold the Medic Rinse and Pre Wash
button for 3 seconds.
2
A beeper will sound, and '
display.
When the child lock is set, all buttons are locked
except the Power button.
NOTE
• Turning off the power will not reset the child lock
function. You must deactivate child lock before
you can access any other functions.
Unlocking the control panel
Press and hold the Medic Rinse and Pre Wash button
for 3 seconds.
• A beeper will sound and the remaining time for the
current programme will reappear on the display.
Beep On / Off
1
Press the Power button.
2
Press the Start/Pause button.
3
Press and hold the Time Delay and Crease Care
button simultaneously for 3 seconds to set the
Beep on/off function.
NOTE
• Once the Beep on/off function is set, the setting is
memorized even after the power is turned off.
• If you want to turn the Beeper off, simply repeat
this process.
' will appear on the