Led Indicator; Sleep Mode - A4Tech RFSOP-29A User Manual

Inserting the Batteries
Checking the batteries' power
RF Optical-Mouse Status
To check the battery power, right-click the mouse icon
"Check RF Optical-Mouse Status" option to display the RF Optical Mouse Status
window. The current battery percentage charge is shown.

LED indicator

1. Another way is to check the LED indicator on the left hand side of the RF
Optical Mouse. The LED indicates: low battery, charging mode, and full
charged.
2. When LED flashes very fast, that represents low battery status. LED flashes
median speed represents charging mode. LED is still, or not flashing represents
full charged mode.
Recharging your RF Optical Mouse
This RF Optical Mouse can be used for long continuous hours without charging.
Once the LED indicator starts flashing very quickly; that signals your RF Optical
Mouse needs to be recharged. You may use the USB charging cable that included in
our package or a Nokia mobile phone cable charger.
Simply follow the below steps:
Using the USB cable
1. Take your USB charging cable and plug it into an available USB mouse port on
the back of your computer.
2. After it's plugged, insert the other end into the charging hole that's located on the
front head of the mouse.

Sleep Mode-

This mouse automatically puts into sleep after 2 minutes without any action.
To awake the mouse; simply just click any key and it will start working properly. This
mode can save battery power.
in the Taskbar. Choose the
— 3 —