Executing Net Jump Commands; Executing Luckyjump Commands - A4Tech RFSOP-48 User Manual

The Pointers tab lets you change the way the cursor appears. Click the down arrow under
and choose the setting you want. The available pointers for each scheme are shown in the pane
below. You can browse to additional pointers, then create your own scheme using the Save As
button.
Motion Tab
Pointer Speed:
SnapTo Button:
each new dialog box or window.
Sonar:
When this box is checked, pressing and releasing the [Ctrl] key will highlight the cursor.
Trails:
Check this box when you want your cursor to display pointer trails. This option is useful
when using an LCD display that can make the cursor difficult to see.
Settings Tab
Command List:
you can assign to either the NetJump or LuckyJump grids.
NetJump (top grid):
change a command, select a new one from the Command List and click on the icon in the grid that
you want to change.
LuckyJump (bottom grid):
command, select a new one from the Command List and click on the icon in the grid that you
want to change.
Wheel:
Check the Reverse scrolling direction box to change the scrolling direction when you turn
the scroll wheel. Select the Scroll or Scroll one "page" per scroll unit radio button to set the
scrolling speed to suit your work habits.

Executing Net Jump Commands

NetJump combines commonly used tasks for Web browsing into one convenient grid and puts them right
under the cursor. To use NetJump, open the Mouse Properties window and select the Buttons tab.
Assign NetJump in the drop-down menu of the button you want. Click O K to close the Mouse
Properties window. Now click the assigned button to open the NetJump grid and execute your
command. (See the Settings Tab section above for instructions on customizing NetJump.)

Executing LuckyJump Commands

LuckyJump combines commonly used tasks for Windows environments into one convenient grid and puts
them right under the cursor. To use LuckyJump, open the Mouse Properties window and select the
Buttons tab. Assign LuckyJump in the drop-down menu of the button you want. Click O K to close the
Mouse Properties window. Now click the assigned button to open the LuckyJump grid and execute your
command. (See the Settings Tab section above for instructions on customizing LuckyJump.)
Lets you adjust how fast the cursor moves on the screen.
Check this box to automatically have the cursor move to the default button in
Shows all the available commands (including User-defined Command Menus) that
The NetJump grid groups commonly used Web-browsing commands. To
The LuckyJump grid groups all-purpose commands. To change a
— 7 —
S cheme