Table of Contents
Advertisement
[Analogue Output]: Select an audio
•
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
[Digital Audio]: Select an audio format
•
for sound output when this player is
connected through the COAXIAL
connector.
[Digital Output]: Select a type
•
of digital output: [Off] - Disable
digital output; [All] - Support
multi-channel audio formats; [PCM
Only] - Downmix to two-channel
audio signal.
•
[LPCM Output]: Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality. [LPCM Output] is
enabled only when [PCM Only] is
selected under [Digital Output].
•
[HDMI Audio]: Enable or disable
the audio output through HDMI
connection.
[Audio Sync]: Set a delay time for
•
audio output to match the video play.
•
[Volume]: Change a volume level.
[Sound Mode]: Select a preset sound
•
effect.
[Night Mode]: Select quiet or full
•
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Note
•
Night mode is only available for Dolby encoded DVD
discs.
12
EN
Preference (languages,
parental control...)
1
Press .
2
Select [Setup] > [Preference] to access
the preference setup options.
[Audio]: Select an audio language for
•
video.
•
[Subtitle]: Select a subtitle language for
video.
[Disc Menu]: Select a menu language
•
for a video disc.
[Parental Control]: Restrict access to
•
discs that are encoded with ratings.
Input "136900" to access the restriction
options: When the password field
is highlighted, press OK to enter an
input stage, press
and press
position.
•
[PBC]: Display or skip the content
menu for VCD and SVCD.
[Password]: Set or change a password
•
to play a restricted disc. Input "136900"
if you do not have a password or if you
have forgotten your password
[DivX Subtitle]: Select a character set
•
that supports the subtitle of your DivX
video.
[Version Info]: Display the software
•
version for this player.
[Default]: Reset all settings to the
•
factory default, except for the settings
for [Disc Lock], [Parental Control]
and [Password].
Note
•
If your preferred language is not available for disc
language, audio or subtitle, you can select [Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
•
The rating levels are country-dependent. To allow all
discs to be played, select [8 Adult].
to select a digit
/
to change a digit
Advertisement
Table of Contents
