Setting Up The Monitor Set; Attaching The Stand Base; Detaching The Stand Base - LG 24MB35PY-B.AUS Owner's Manual

Setting up the Monitor set

Attaching the Stand Base

1
Place the Monitor set with the screen side
down on a flat and cushioned surface.
CAUTION
To protect the screen from scratches, cover
y
the surface with a soft cloth.
2
Check the position (at the front and rear) of
the stand body, then mount the stand base on
the stand body as shown in the figure.
Stand Base
Stand Body
ASSEMBLING AND PREPARING

Detaching the stand base

1
Place the monitor's screen face down.
To protect the screen from scratches, cover the
surface with a soft cloth.
2
Detach the stand base from the stand body.
CAUTION
The components appearing in the illustra-
y
tions may look different from the actual prod-
uct.
Do not carry the monitor upside-down as this
y
may cause it to fall off its stand, resulting in
damage or injury.
To avoid damaging the screen when lifting
y
or moving the monitor, only hold the stand or
the plastic cover. This avoids putting unnec-
essary pressure on the screen.
Only remove the tape and the locking pin
y
when the monitor is mounted on the stand
base and is in an upright position. Otherwise,
the stand body may protrude, which may
lead to injury.
5